BNT-1000AP
AC Input Capacity on Battery 1000VA
AC Input Voltage 100V or 110V/115V/120V or 220V/230V/240V +/- 25% at line input
AC Input Frequency 50 or 60 Hz+/-5% (auto sensing)
C Output Voltage Simulated sine wave at 100V or 110V/115V/120V +/- 5% for 120V model or 220V/230V/240V +/- 5% for 230V model
AC Output Frequency 50 or 60 Hz +/- 0.5%
Protection Spike 480 Joules / 2ms
Protection Overload UPS automatic shutdown if overload exceeds 110% nominal at 60 sec and 130% at 3 sec
Battery Typical 6 hours (to 90% of full capacity)
Battery Backup Time Full Load 8 minutes
Alarm Battery Backup Slow beeping sound (about 0.47 Hz)
Alarm Battery Low Rapid beeping sound (about 1.82Hz)
Interface RS-232YES
Environment Ambient 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-40 deg c
In stock
Related Products
PRO-1100LCD
• Advanced battery management increases
longevity,performance, and reliability
• 2 boost and 1 buck AVR to stabilize input
voltage
• LCD displays UPS status, including voltage,
load,and battery statuses
• Automatic restart of UPS while AC power
recovering
• Off-mode charging function
• USB communications interface with power
management software
• Friendly battery door design for easy batteries
replacement
• DC cold start function
• 140 VAC ~ 295 VAC wide input voltage range
version(Optional for 220 V)
• Green power function for energy saving
(Optional)
BNT-500A
AC Input Capacity on Battery 500VA / 300W
AC Input Voltage 100V or 110V/115V/120V or 220V/230V/240V, +/- 25%, Single phase
AC Input Frequency 50 or 60 Hz+/-5% (auto sensing)
AC Output Waveform Simulated sine wave
AC Output Voltage line input, +/-5%
AC Output Frequency 50 or 60 Hz +/- 0.5%
Protection Spike 480 Joules / 2ms
Protection Overload UPS automatic shutdown if overload exceeds 110% nominal at 60 sec and 130% at 3 sec
Battery Type Sealed, Maintenance-free lead acid
Battery Typical 6 hours (to 90% of full capacity)
Battery Backup Time Full Load 8 minutes
Alarm Battery Backup Slow beeping sound (about 0.47 Hz)
Alarm Battery Low Rapid beeping sound (about 1.82Hz)
Environment Ambient 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-40 deg c
MIC-700A
• Multiple LEDs indicates UPS statuses, including
normal. charging, back-up, battery low, fault,
and overload
• Two boost and one buck AVR to stabilize
input voltage
• Advanced battery management increases
longevity, performance, and reliability
• Automatic restart of UPS while connectedto
AC power recovering
• DC cold start & off mode charging function
• Green power function for energy
saving (Optional)
• 140-295VAC wide input voltage range version
(Optional for 220V models)
NET-3000 (L) RT
• Microprocessor-based line interactive design
• Pure Sine Wave output
• User-friendly and easy-shift LCD
• Built-in boost and buck AVR to stabalize
output voltage
• Output power factor 0.8 and 3:1 crest ratio
• Hot Swappable battery design
• Programmable power management outlets
• ECO operation for energy saving
• Emergency Power Off Function (EPO)
• USB & RS-232 communication available
• Long run (L) models available
• USB communication port with power
management software and monitor UPS status
• Intellegent slot allows SNMP card (optional) for
remote power management
KIN-2200AP
AC Input Capacity on Battery 2200VA
AC Input Voltage 100V/110V/120 +/- 25%; 220V/230V/240V +/-25%
AC Input Frequency 50 or 60 Hz+/-10% (auto sensing)
Output Voltage On Battery 100V/110/120V +/- 5%; 220V/230V/240V +/- 5%
AC Output Voltage Simulated sine ware
AC Output Frequency 50 or 60 Hz +/- 0.5%
Protection Spike 320 Joules, 2ms
Protection EMI/RFI 10dB at 0.15 MHz, 50 dB at 30 MHz
Battery Type Sealed, Maintenance-free lead acid, with 3 – 6 years typical lifetime
Battery Typical 4 hours (to 90% of full capacity)
Battery Backup Time Full Load 7 minutes
larm Battery Backup Slow beeping sound (about 0.47 Hz)
Alarm Battery Low Rapid beeping sound (about 1.82Hz)
Environment Ambient 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-40 deg c
PRO-2200LCD
• Advanced battery management increases
longevity,performance, and reliability
• 2 boost and 1 buck AVR to stabilize input
voltage
• LCD displays UPS status, including voltage,
load,and battery statuses
• Automatic restart of UPS while AC power
recovering
• Off-mode charging function
• USB communications interface with power
management software
• Friendly battery door design for easy batteries
replacement
• DC cold start function
• 140 VAC ~ 295 VAC wide input voltage range
version(Optional for 220 V model)
• Green power function for energy saving
(Optional)